How to increase brightness for car headlights

Pham Duy DNUM_CHZBAZCACD 09:17

For cars, headlights are considered the eyes and soul, helping drivers observe well while participating in traffic.

According to engineer Dinh Van Thinh, owner of Tho Thinh auto garage (Nguyen Xien, Thanh Xuan district, Hanoi), high beam - low beam is a common type of light placed in the headlight cluster at the front of the car, with the task of illuminating the front of the car. Therefore, high beam - low beam plays an important role and is always of interest to users when choosing.

Headlights - high beam lights

With the feature of warning drivers about traffic conditions and obstacles when driving at night, headlights will help drivers have a longer vision and a certain height to see traffic signs, helping drivers proactively handle problems on the road.

Low beam - near light

This type of light is suitable for driving on crowded roads with lots of traffic because it does not affect oncoming traffic.

Fog lights

Fog lights or fog lights are responsible for increasing visibility for vehicles in front and behind in bad weather conditions such as dark, foggy or dusty, smoke-filled conditions that reduce the driver's visibility.

According to regulations, fog lights have a characteristic yellow light for identification. The location of fog lights and fog lights is usually low on the chassis, below the front of the vehicle to avoid dazzling drivers of oncoming vehicles.

do-den-pha-giup-cho-xe-them-sang-13471305-9508.jpg
Headlights help brighten the car, allowing the driver to proactively handle situations. (Illustration)

Solutions to increase car lighting

Replace the light bulb

This is the simplest solution, and the lowest cost, just replace the original halogen bulb with a light-increasing bulb, the brightness increases about 120-130% compared to the original light.

This method is quite quick and simple to install.

Install lumiled bulbs for headlights

This is a type of high beam and low beam bulb with full pins H1, H4, H7, 9005... suitable for all car models. The bulb has a clearly stronger intensity than the original bulb, the heat sink uses a fan or heat sink wire, good beam..

When installing lumiled bulbs, the car does not have to drill any position, the light concentration is good, the light intensity is stronger than the original bulb. However, because the bulb is of good quality, the price is also relatively high.

Xenon bulb installation

Installing xenon bulbs will increase brightness by about 250-300% compared to original halogen bulbs.

Car owners can also choose light colors such as yellow light, yellow white light, blue white light.

Xenon degree

This is the most perfect solution to improve the brightness of the headlights, helping to increase the brightness 10 times that of the original bulb, the xenon bi has both high beam and low beam modes. If the low beam is upgraded, when the high beam is turned on, the car will have 4 headlights on at the same time (2 original headlights + 2 xenon bi headlights). If the high beam is upgraded, when the low beam is turned on, there will be 4 low beam lights on at the same time (2 original low beam lights + 2 xenon bi headlights).

Pham Duy