Safe reversing skills for new drivers

November 11, 2016 08:48

Reversing a car is considered one of the important skills, because if you do not know how to reverse a car, the level of danger for the driver and other people on the road is very high.

So how to reverse a car safely? The principles below will guide you through the specific steps in reversing a car to keep yourself and everyone around you safe.

Basic principles

Left is right, right is left

This is the principle that drivers must "know by heart" when reversing. When turning the steering wheel to the left, the car will move to the right and vice versa. Remember this principle when reversing because even the smallest mistake can cost you a collision.

Go forward, stick to the back, go back, stick to the belly

Lùi bám bụng sẽ giúp bạn an toàn.
Belly grip will keep you safe.

When going forward, the driver must stick to the wide side of the curve. If turning left, stick to the right edge of the road. If turning right, stick to the left edge of the road. When reversing, it is different. If reversing right, stick to the right, and if reversing left, stick to the left.

Adjust the rearview mirror

Adjusting your blind spot mirrors will help you gauge the distance to previously parked cars.

Chỉnh gương xóa điểm mù khi lùi xe.
Adjust the mirror to eliminate blind spots when reversing.

Drivers should widen their rearview mirror field of view by tilting their head closer to the left window. Adjust the mirror until the body of the car almost disappears from the mirror and only the rear of the car can be seen. Do the same with the right mirror to minimize blind spots.

When reversing, remember to continuously observe both mirrors to grasp the situation.

Basic steps for reversing a car

Before reversing, adjust the driver's seat and steering wheel so that you have a comfortable driving position and can observe the rearview mirrors and everything around you.

First, you should turn on the turn signal on the side you want to back into and find a space to stop. Get out of the car to see the space to back up.

Quan sát gương khi lùi.
Check your mirrors when reversing.

Put it in reverse and start to park, keep your hands on the steering wheel, and check your mirrors. Always keep your foot on the brake and drive slowly but surely when backing up, as reverse is the strongest gear in the transmission to keep the car from getting out of control.

While reversing, if you see the car veering off course, you must turn the steering wheel back. If it veers off course too much, stop the car and move forward to readjust the reversing direction.

If the new driver is not used to looking in the mirror, they can also turn their head back to get the most realistic image. But also be careful not to look too long and forget the front because turning the steering wheel too much can cause collision.

To become a “veteran” you need to practice reversing techniques and constantly rotate to observe the rearview mirrors on both sides. That will help you limit blind spots compared to turning your head to observe when reversing.

 Luyện tập kỹ năng lùi ở bãi rộng.
Practice reversing skills in open space.

When new drivers practice this technique, they should choose a spacious location with a wide view to measure accurately. Once they get used to it, having to back into narrow spaces will be normal.

Once you master the above skills, backing into a parking space is no longer difficult for any new driver.

According to VNN

RELATED NEWS