5 things to check after driving in flood
Rain, storms and floods always bring trouble to cars. On days like these, if you have to "wade through water", remember to check the following things to protect your car as well as your own safety.
1. Check the brakes
After “wading”, the engine may still run, but the brakes may slip and lose grip. It is best to press the brake pedal a few times before continuing to drive, as this will help the brake pads and discs/drums return to normal operation.
2. Engine monitoring
Pay attention to any unusual engine behavior after driving through flooded areas. For example, if the engine runs harder when you start it or suddenly stalls and makes strange noises, stop the car in a dry place and check the following: check the dipstick for water in the engine oil; check the air filter for wetness; if water has entered the engine compartment, take the car to a repair shop.
3. Check electrical and electronic components
While most modern car electrical connections are waterproof, there is no guarantee that moisture will not get in and cause a short circuit. Check components such as fuses, control boxes, and lights for damage. If there is a problem, disconnect the battery and call a mechanic to check it out.
4. Check the foot mat
Check floor mats and clean cabin.
Sometimes water can get into the car and soak into the carpets. If this happens, remove the floor mats and wash them. For the cabin, scrub and dry as soon as possible. Remember that most of the airbag control components are located under the seats, so be careful not to let moisture get into that area.
5. Don't forget to check the spare tire area
This is an area that many people forget after their car has been in the water and often don't even pay attention to. If water gets into this area, dry it immediately. The metal parts of the spare tire and other tools will gradually rust after being exposed to water.
