Tips for preserving car batteries
(Baonghean.vn) - The battery is one of the most important devices in a car's engine, responsible for storing electricity and providing power to electrical consuming devices (loads). Therefore, it is necessary to regularly monitor and maintain this device.
Regularly check battery fluid level
 |
Make sure the fluid level is between the lower and upper levels (marked on the tank). For maintenance-free tanks, check the condition of the indicator eyes.
Always keep the battery cool
 |
Direct exposure to high temperatures under the hood repeatedly and for a long time will adversely affect the quality of the battery. But don't worry, you can solve the above problem by using a battery cover or insulation. The insulation will keep the battery from being affected by the heat generated under the hood of the car.
Voltage level monitoring
 |
You should regularly check the battery voltage level by applying a heavy load to the battery for about 30 seconds to check the output voltage. A green light on the meter means the battery is in good condition.
Cleaning with Baking Soda
Baking soda, also known as "salt water" - sold at many drug stores - is a great choice for maintaining batteries. Battery terminals often corrode due to electrolysis; you can scrub the deposits off the terminals using a toothbrush and a mixture of baking soda and warm water, then wipe the mixture off with a towel. Now you have a new set of clean battery terminals.
Use "cow fat" to prevent corrosion
Once you have cleaned off the rust, make sure it doesn't reappear too soon. Using "cow grease" on the battery terminals will prevent future corrosion and keep them in good condition during the winter months.
Low temperatures increase the resistance of the wires and thicken the oil in the engine, forcing the battery to work harder than usual. Corrosion increases the resistance of the electrodes, causing the battery to operate less efficiently.
Maintenance for longer lasting and more efficient batteries - Regularly check the battery fluid level, ensuring that it is between the lower and upper levels (marked on the battery). For maintenance-free batteries, check the condition of the indicator eyes. - For wet batteries, it is recommended to fully charge them before use. When installing the battery in the vehicle, apply a layer of anti-rust grease to the battery terminals after tightening the screws and they must be tightened to avoid vibration and shaking. - Do not install additional non-genuine power consuming devices. This increases the design load on the charging system and battery, leading to reduced battery life. - Before storing or using less, you need to fully charge the battery and recharge it once a month. When using it again, you should also charge the battery. Do not leave the battery tilted for a long time because the acid will leak out. |
Ngoc Anh
(Synthetic)
| RELATED NEWS |
|---|
