Why shouldn't you use both feet when driving an automatic car?

Why shouldn't you use both feet when driving an automatic car?

Car manufacturers recommend that automatic car drivers should only use their right foot to step on the accelerator and brake, and leave their left foot alone. However, many drivers have the habit of using their left foot to step on the brake and their right foot to step on the accelerator. This is a very harmful habit, with a high risk of causing serious traffic accidents, so it should be eliminated immediately.

There are two main reasons why manufacturers and experts recommend that drivers should not use both feet when driving an automatic car, but should only use the right foot:

First is about the design of the car.

On automatic cars, the accelerator and brake pedals are designed to be offset to the right. Therefore, when driving, if you use your left foot, you are in the wrong position, and may have to twist your body and cause a crooked spine while driving.

Second, in terms of operation

Using both feet when driving an automatic car will easily lead to the situation of pressing both the gas and the brake at the same time when moving on the road. This habit of the driver causes the brake to work continuously, easily becoming red and ineffective. In addition, this is also the cause of reduced vehicle performance, increased fuel consumption.

Using both feet when driving an automatic car can easily lead to pressing both the gas and the brake at the same time while moving on the road.

More importantly, using both feet when driving an automatic car means that in unexpected situations, the driver will reflexively step on both feet, reducing the ability to stop the car, and the risk of an accident is therefore very high.

Automatic driving techniques

For those who are new to driving, automatic cars are the preferred choice because of their convenience, but to ensure safety, drivers need to learn about the techniques of driving automatic cars.

Pedal design on automatic transmission cars

The first thing to remember when using an automatic car is to find the location of the accelerator and brake pedals. Observe carefully and remember their locations to avoid confusion while driving.

With automatic transmission vehicles, the brake pedal is on the left and the accelerator pedal is on the right. When driving, you should only use your right foot to brake or accelerate. Your left foot should be placed on the footrest and not used to drive. Get rid of the habit of using both feet when driving a manual transmission vehicle.

Symbols on automatic transmission

To drive safely, drivers also need to learn the symbols on the automatic transmission. Remembering these basic symbols on the automatic gear lever will help control the car easier, more convenient and safer.

Number D: Abbreviation for DRIVE, which means driving in the forward direction

Number R: Abbreviation for REVERSE, this is the command that instructs the driver to drive the vehicle in reverse.

N: Also known as MO and is used when the car stops at red lights or intersections. When shifting gears, make sure to keep your foot on the brake to avoid the car moving backwards or forwards.

P: Some vehicles may require the brake pedal to be depressed before shifting into another gear. P should be used when the vehicle is stationary as it can lock the transmission.

Number 1 (similar function to L, 2): The driver will use number 1 when driving in bad weather, muddy roads, steep hills to increase vehicle speed.

2nd gear: 2nd gear is used when driving in bad weather, overtaking other vehicles or when more power is needed. The driver will shift from 1st gear to 2nd gear.

Number S: Abbreviation of SPORT, this is a sport driving mode designed on automatic transmission vehicles./.