It is too dangerous if drivers ignore signs of damaged car bearings.

Bearings are an extremely important part for the operation of machinery and equipment. Bearings appear with the main role of reducing friction, increasing load capacity and positioning rotating equipment.

Using bearings properly will of course bring efficiency and help the machine operate smoothly, the life of the equipment will also increase accordingly, but on the contrary, if you do not know how to install, or just because of some other factors, the life of the bearings and machines will decrease. So what is the cause of that, the signs to recognize and how to fix it?

Car bearings are very easy to damage and need to be detected quickly to avoid danger.

There are many reasons for bearing damage such as poor lubrication, incorrect installation, unsuitable bearings, unclear information about the housing and shaft, water entering the bearing or improper engine cleaning...

The most obvious sign of a problem with a car's bearings is when the car vibrates but the tire doesn't explode. Normally, today's cars have extremely durable bearings. However, if the car travels a lot on bad terrain or is involved in an accident, the bearings can easily break. Therefore, when you see the wheel shaking while driving, you should quickly take the car in for maintenance and repair to minimize damage caused by other parts.

In addition, when the car is running on the highway and gradually increasing speed, the car vibrates, possibly due to a bent drive shaft and worn bearings.

When the bearings are dry and make noise, it causes high friction, generates heat, and quickly damages the engine. Therefore, when the vehicle has an abnormal increase in temperature, it should be replaced promptly to reduce the impact on other parts, especially the engine.

Therefore, when using a car, it is necessary to pay attention to carefully installing the car's bearings; Use reasonable bearings (correct vehicle load, choose the right lubricant...); Keep the bearings away from dust and dirt, minimize oxidation and wear of the bearings; Keep the surrounding environment clean and clean regularly.